Vian Spa Chemicals

Essentials - Anti Foam - 1ltr Vian Anti Foam is fast and effective at destroying the foam that appears on the surface of the water. It can also be used as a preventant. For best result use 2 small drops of foam remover in affected foam areas, too much foam remover can iritate skin. To reduce foam in the spa try washing your swimwear in a washing machine without detergent, also take a shower prior to using the spa. Need help?   If you need any help or advice please do not hesitate in calling us, we have many years of maintenance, service and repairs experience with hot tubs and spas....

Vian - Bromine Tablets - 1kg Bromine tablets are used for the sanitation and algae control of your spa, they are relatively pH neutral and they are very effective. These tablets disperse active bromine which kills bacteria and other potentially harmful organisms.   Bromine is often preffered because it is known to be less harsh than chlorine on the skin. Need help?   If you need any help or advice please do not hesitate in calling us, we have many years of maintenance, service and repairs experience with hot tubs and spas. You can contact us by phone on 01342 717982...

Vian - Non-Chlorine Shock 1KG The perfect treatment after heavy use of the Spa, treats cloudy and grenn water. Using this Non-Chlorine Shock weekly will remove non-filterable waste. Also used to reactivate unused chlorine or bromine that is in the spas water. Once bathing has finished you can shock the spa water with a ratio of 15g per 1000 litres. Add the shock to the spa water when the filtration pump is running on full to ensure it is disolved properly. Remember to always try and maintain the pH levels within the 7.2 - 7.6 range and free chlorine between 3 - 5 mg/l. Need help?  ...

Vian - pH Increaser - 1kg The dosing rate is 10g per 1000 litres (220 gallons) of spa water. Directions of use: Simply add the resulting solution to your Hot Tub or Spa, add the solution near the water inlets, whilst the pump is running, for improved distribution. Check the PH level after 12-24 hours. If the PH is still below 7.2, then repeat steps mentioned.  A level of between 7.2 & 7.6 is perfect.   Need help?   If you need any help or advice please do not hesitate in calling us, we have many years of maintenance, service and repairs experience with hot tubs and spas. You...

Vian -pH Reducer - 1.5kg Vian pH minus, dose at a rate of 10g of product in 220 gallons (1000 litres) spa water, Add the resulting solution to the pool whilst the pump is running, preferably near the water inlets to aid distribution. After 12 to 24 hours re-check pH level of the water and if it is still above 7.6 repeat the above dose. A level of between 7.2 & 7.6 is perfect. Need help?   If you need any help or advice please do not hesitate in calling us, we have many years of maintenance, service and repairs experience with hot tubs and spas. You can contact us by phone on 01342...

Vian - Small Chlorine Tablets - 1kg These small chlorine tablets are ideal for continual dosing of your spa, they produce free active chlorine which kills bacteria and other potentially harmful organisms that can breed in a spas water. These small tablets are designed for use with feeders & dispeners that float on the waters surface, you can find these in the dispensers and water testing section of our store. Need help?   If you need any help or advice please do not hesitate in calling us, we have many years of maintenance, service and repairs experience with hot tubs and spas. You...

Vian - Spa Cartridge Cleaner - 1ltr Dirt and grease can rapidly gather on filter cartridge elements, this can effect performance and waterflow. This Spa cartridge cleaner will clean the filter and restore performance and efficiency. Fill a bucket with warm water and add approx a 1/4 of the bottle, the bucket should be large enough to totally submerge your filter cartridge. Soak the cartridge element for a minimum of 8 hours then remove and rinse thoroughly with clean water. For the best results allow the filter cartridge to fully dry before installing back into the spas filter housing.   Need help?...

Vian - Spa Clarifier - 1 Litre Give your spa a sparkle with this Vian Spa Clarifier. This product helps maintain crystal clear spa water and removes cloudiness, removes small unfilterable particles by merging the particles together. Helps to prevent algae, scale and staining. Directions of use: This is a weekly treatment of 2 caps per week on a medium sized hot tub. To apply, turn pumps on and add Spa Clarifier directly to the Spa water. Need help?   If you need any help or advice please do not hesitate in calling us, we have many years of maintenance, service and repairs experience...

Vian - Spa No Scale - 1 Litre Vian Spa No Scale helps prevent and remove the build up of limescale on the  heater element, jets, pumps and pipework. T his is one of the most important spa chemicals you can use as high limescale content in the spas water will damage your heater element, pumps and jets. Directions of use: This is a weekly treatment of 2-3 caps. Need help?   If you need any help or advice please do not hesitate in calling us, we have many years of maintenance, service and repairs experience with hot tubs and spas. You can contact us by phone on 01342 717982 or...

Vian - Spa Surface Cleaner 1 Litre The Spa surface cleaner is used to remove oils and greases from the waterline area with no risk of damage to the spas acrylic. It is also used to clean the whole surface of the spa when it is drained and being refilled. Can also be used when spa is still in use around the inside top edge etc, PH may drop slightly due to acidity of product but this can be resloved with PH increaser.   Directions of use: Wet the are of the spa you will be cleaning, apply undiluted surface cleaner and rub in with a sponge. Leave to stand for a minimum of 10 minutes and then rinse....

Vian - Stabilised Chlorine Granules - 1kg Ratio: 2g per 1000 litres or 220 gallons of spa water. Instructions: Pre-dissolve the granules in a plastic container. Now make sure the filtration system is running on your spa, now add the mixed solution near the returning water inlets. These are perfect for regular chlorination, and have a very small effect on the overall pH level.  Need help?   If you need any help or advice please do not hesitate in calling us, we have many years of maintenance, service and repairs experience with hot tubs and spas....