Stud mount, for plastic GS & GL Balboa control boxes.
Fitted with the highest quality Titanium heating element.
Very common heater for Metal M7 / GL Balboa control boxes.
2" heater O Ring Gaskets (sold in individually) These are the most common types of heater gaskets and will fit any hot tub with a 2" heater assembly.
Latest circulation pump from Balboa Water Group, replaces other circ pump models such as Ultima. Previously named Balboa High Performance Pump.
GL2000 with a 3kw M7 heater, this control box will operate: 3x pumps, 1x blower, 1x ozone and 1x 12v light.
*Works with Balboa ML range of Topside Controls*
This 3 core AMP cord will work for - One speed pumps, Air Blowers, Circulation Pumps & Ozonators.
Complete with the latest Titanium heating element, pressure switch, tail pieces and Gaskets.
M7 sensor for plastic Balboa control boxes with 12" cable - Sold individually.
Balboa 2hp Niagara - Perfect for replacing Vico Ultrajet, Ultimax & Sta-rite pumps.
This Balboa Bundle operates a three Pump & Blower system. Perfect Chinese upgrade kit. - See description for more information.
BP2100 WiFi ready control box with 3kw M7 heater, this can operate a 3 pump system from a Smart phone or IPad when connected to a Balboa wireless receiver.
Balboa 1.5hp HA440NG - Direct replacement for discontinued HA440 Magnaflow pump found on Spaform spas.
VL801D Topside with Overlay - Common on Spaform, Catalina, Aegean, Hydrospa & Leisurerite spas.
VL701S Topside with Overlay - Commonly used with Canadian Spa 2005LE control boxes.
M7 sensor for metal Balboa control boxes with 24" cable - Sold individually.
3hp Vico Ultimax wet end for modern Balboa Niagara spa pumps.
This Balboa Bundle operates a three Pump & Blower system - See description for more information.
GS100 with no heater included. This control box will operate a 2Kw or 3Kw heater and 1x two speed pump (Circ pump if main pump one speed), 1x ozone and 1x 12v light.
Two speed pump AMP 10ft cord - 4 pin configuration, 4 core cable.
This 10ft 3 core AMP cord will work for - One speed pumps, Air Blowers, Circulation Pumps & Ozonators.
Two speed pump AMP cord - 4 pin configuration, 4 core cable.
Balboa 3hp Niagara - Perfect for replacing Vico Ultrajet, Ultimax & Sta-rite pumps.
GS501Z with a 3kw M7 heater, this control box will operate: 2x pumps or 1x pump & 1x blower, 1x ozone and 1x 12v light.
This Balboa bundle operates a one pump system - See description for more information.
ML700 Topside with Overlay - Common on Spaform Prestige ranges & Cosco Platinum 2 spas.
2hp Vico Ultimax wet end for modern Balboa Niagara spa pumps.
New longer GS100 2kw heater that replaces older discontinued 5.5" model, used with modern plastic and older metal control boxes.
TP600 Topside with Overlay - Used with BP601 and BP2100 control boxes.
This Balboa Bundle operates a two Pump & Blower system - See description for more information.
WiFi receiver module for Balboa's BP series control packs.
GS510SZ with a 3kw M7 heater, this control box will operate: 2x pumps, 1x blower, 1x ozone and 1x 12v light.
*Works only with Serial Standard Topside Controls*
Jets 1 Auxiliary topside with overlay - Works with GL spa packs.
ML900 Topside with Overlay - Common on Canadian Spas Swimspa ranges.
This Balboa Bundle operates a two Pump or one Pump & Blower system - See description for more information.
Vico Ultrajet 2 speed pump - Cheaper alternative using an original Vico wet end and Italian EMG motor.
Common on older Canadian Spa & Hydropool spas.