Waterway Plastics

1/8hp 1.5" side discharge wet end used on Waterway's Iron Might Circ pump.

Direct replacement for existing USA smooth bodied Waterway Hi-flo pump for when space is limited.

Direct replacement for existing USA smooth bodied Waterway Executive 48 pump for when space is limited. Large 2.5 inch suction with 2 inch discharge.

Direct replacement for existing USA smooth bodied Waterway Executive 48 pump for when space is limited. 2 inch suction and discharge.

Direct replacement for existing USA smooth bodied Waterway 1.5" centre discharge pump for when space is limited. Can be used as a replacement for Dreammaker spas.

Waterway 2hp pump with the larger 2.5" suction.

The most common 2hp 48 Frame pump in Europe.

3/4 inch straight coupler - Socket x Socket

Spiggot fits inside a 3/4" fitting, providing a 1/2" socket for a 1/2" pipe to be glued inside.

1 inch straight coupler - Socket x Socket

3/4" Metal pipe clamps used for either 3/4" clear or white pipe.

1.5" union O' rings, fits unions used with Waterway & Aqua-flo pumps. Can be used with some spa heaters.

1/2 inch Equal Tee - Socket x Socket x Socket

Spiggot fits inside a 1" fitting, providing a 1/2" socket for a 1/2" pipe to be glued inside.

3/4" spigot end plug used to blank off a section of 3/4" plumbing.

1" spiggot end plug used to blank off a section of 1" plumbing.

1.5 Inch heater O'Ring Gaskets - Sold in individually

3/4 inch Equal Tee - Socket x Socket x Socket

2.5" pump union O' ring, fits the larger 2.5" suctions on Waterway pump wet ends.

2" union O' rings, fits unions used with Waterway & Aqua-flo pumps. Can be used with some spa heaters.

1 inch 90 Elbow - Socket x Socket, 1 inch imperial pipe glues inside both ends of this fitting.

Glues inside 1/2" pipe or a broken/damaged male fitting leaving you with a 1/2" spiggot fitting, this then glues inside another 1/2" fitting.

2" pump union seal - This is the flat type and because they are flat they will fit all 2" pump unions.

Spigot fits inside a 1.5" fitting, providing a 1" socket for a 1" pipe to be glued inside.

3/8" barb x 3/8" barb x 3/8" barb - For joining 3/8" air pipe.

3/8" barb x 3/8" barb - For joining 3/8" vinyl air pipe.

1 inch Equal Tee - Socket x Socket x Socket

Fits all Waterway Poly Jet wall fittings.