• Service & Repair
  • Hot Tubs for SaleCOMING SOON
  • Shop By Hot Tub Brand
  • Shop By Parts Brand
  • Our blog
  • Contact us
-12%

Sundance Spas 2.7kw Low Flo Smart Heater

12 item(s)
0.00
(0 reviews) Write a review
HTP920
Price to buy in points:4537 points
£18146
You save: £2059
(£15122 Ex. VAT)
RRP ex VAT: £17181
+
Add to cart
Delivery Options
Payment Methods

 

  • PayPal
  • SagePay
  • Credit Cards
  • Debit Cards
Why Choose us

 

  • Fast UK & EU Delivery
  • Free UK Next Day Delivery, Spend £100
  • Free Technical Support
  • A Family Run Business Who Cares
  • 5 Star Rating on Trust Pilot
  • 1 Year Manufacturers Warranty
  • No Quibble Returns Policy
  • 25 Years of Unrivaled Parts Knowledge
+
Sundance Spas 2.7kw Low Flo Smart Heater
12 item(s)
0.00
(0 reviews) Write a review

Sundance Spas 2.7kW Low Flo Smart Heater

Genuine replacement Low Flow 2.7kW heater 6500-315 used on many Sundance spas & hot tubs manufactured after 2001. Very distinctive grey plastic-type of low flow spa heater only found on Sundance Spas, usually connected vertically to the side of Sundance/Jacuzzi spa control boxes and used in conjunction with a small dedicated Laing circulation pump. 

 

Sundance Spa Heater Overview

  • This 6500-315 Smart heater is used specifically with Sundance/Jacuzzi spa control boxes.
  • 3/4" Vinyl pipe Inlet and outlet connections.
  • A Laing E10 with 3/4 inch smooth barbed connections is used with this heater.
  • Built-in Hi-Limit sensor to monitor water temperature inside the heater and prevent overheating and premature heater failure.
  • Found on many spa models from Sundance Spas manufactured after 2001 such as Maxxus.
  • Can replace the older version of this heater C3403-1 but sensors may be different.

 

Laing Heater Specifications

  • Manufacturer - Sundance
  • Part Number - 6500-315
  • Type of Product - Spa or Hot Tub heater assembly
  • Kilowatt Rating - 2.7kW
  • Element Material - Titanium
  • Flow Detection - External Flow Switch
  • Sensors Type - Internal Hi-Limit auto-reset.
  • Pipework Connection Size - 25mm for 3/4 Vinyl pipe
  • Length - 380mm
  • Width - 105mm

 

Heater Fitting & Removal Guide

Replacing a Sundance Low flow smart heater is relatively easy and can be done with spa water in or out, ideally, we recommend taking the water out of your spa. Drain the spa down, disconnect the heater power cables from the spa control box PCB. Slide back the spring clamps that secure the 3/4 inch vinyl pipe onto the inlet and outlet of the old heater. Heat the vinyl pipe at the heater connections and slide the pipes off. Remove the old heater completely from the spas cabinet, reinstall the new one the same as you removed it. A key point to aid a good tight water seal of the 3/4 inch plumbing connections is to make sure they are heated up when you pop them back on the new heater, whilst hot install the spring clamps and secure them in place.

 

Need Help?

It can be a bit confusing choosing your new spa heater as brand names and models are not always written on them. The quickest way is to simply send us some images of the complete spa heater assembly you need the replacement for through our Contact us page and let us do the work for you.

Manufacturer:
Sundance Spas
Product Type:
Spa & Hot Tub Low Flow Heater Assembly
Part Number(s):
6500-315
kW Rating:
2.7kW
Element Material:
Titanium
Flow Detection:
External Flow Switch
Sensor Type:
Internal Hi-Limit Sensor
Pipe Connection Size:
3/4" Vinyl Pipe
Length:
380 mm
Depth:
105mm
Compatible With:
Sundance/Jacuzzi Spa Control Boxes Only.
Average Star Rating:
0.00 (0 reviews Total)
  • 5 stars
    0
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
Have you used the product?
Tell us something about it and help others make the right decision
Show reviews with:
5 stars (0 reviews)
4 stars (0 reviews)
3 stars (0 reviews)
2 stars (0 reviews)
1 star (0 reviews)

No reviews found