Balboa Water Group

Balboa 2kw GS100 M7 15" Remote Heater - 58350 Official high-quality replacement 2.0kW remote GS100 M7 15" Balboa heater used specifically on hot tubs and spas. This is the 15-inch with 2-inch unions model which was used in conjunction with the old metal boxed GS100. Usually found on plug and play spas as the 2kw element only draws between 8-8.5 amps, thus keeping a spa running below 13 amps when heating. The following items are included with this complete Balboa 58350 spa heater assembly: 2x 2-inch heater gaskets 2x Balboa 36-inch M7 sensors 1x Power cord with 3-pin Amp plug 2x...

Balboa Bundle - GS500Z 2kw & VL403 4 Button Topside Control This Balboa GS500Z bundle is ideal for upgrading a Chinese spa control system or updating an old unserviceable one that parts are unable to obtain.  Balboa M7 Technology Balboa's GS & GL control boxes all come with the latest M7 technology, which means no more need for external temperature sensors in the spa shell or pressure & flow switches to determine water flow. This technology consists of two M7 sensors, one at each end of the heater assembly which is a far superior all-in-one method to detect water flow...

Balboa WAVEZONE Sanitation System This is Balboa's most advanced sanitisation system for hot tubs, spas, and swim spas combining UV & ozone. This Balboa unit uses AOP, AOP is a process that generates hydroxyl radicals for better sanitation power. The hydroxyl radical is not only considered highly reactive, it is the strongest oxidant in the water. When ozone and UV are used in combination together in a reactor chamber, the sanitation power is multiplied.  Wavezo3ne Benefits Clears Away Impurities  - Wavezo3ne clears away impurities from the water by killing viruses and biological contaminants....

  Heater can be fitted to control boxes such as Balboa Lite Leader, Spaform SF50 & the M1 TUV. A metal pouch is located on one side to secure the hi-limit temperature probe in place, Pre-M7 sensors are used. Supplied pressure switch is used to determine how much flow is passing through the heater tube and prevents heater failure. Found on older spa models from brands such as Spaform, Leisureite, Canadian Spa, Hydropool Hot Tubs, Freedom Spas, Beachcomber, Hydrospa and many others.   Manufacturer  - Balboa Water Group Part Number  - 58027 (replaces many...

Very common heater for Metal M7 / GL Balboa control boxes.

Fitted with the highest quality Incoloy 825 heating element.

Laing/Balboa 2.9kW Half Loop Style Low Flow Heater High-quality replacement Half Loop Style Low Flow 2.9kW Balboa/Laing heater 58320 used specifically on Sundance & Jacuzzi Spas, Hotspring/Caldera Spas & Southwest Spas. This 2.9kW half-loop style low flow heater includes a built-in Hi-Limit sensor and cable to connect directly to your spa's control box. These heaters have been manufactured by a few brands such as Therm Products, Laing and Sundance/Jacuzzi over the years and this latest model from Balboa is the direct replacement.   Laing/Balboa Heater Overview This 58320...

  The heater can be connected to any GS or GL 3kw Balboa control boxes such as  Balboa GS500Z, GS501Z, GS510SZ, GS501SZ, GS510DZ, GS520DZ, GS523DZ, GL2000 & GL2001. Slave heater has a built-in hi-limit sensor and the Master Balboa spa control box is used for power and flow detection Found on many swim spas and large spas that hold a large volume of water. Manufacturer  - Balboa Water Group Part Number  - 58133 Type of Product  - Spa or Hot Tub heater assembly Kilowatt Rating - 3.0kW Element Material - Incoloy 800 Flow Detection - Master Spa pack...